> For the complete documentation index, see [llms.txt](https://docs.guestway.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.guestway.io/ai/ai-center/how-to-set-up-auto-pilot.md).

# How to set up Auto-Pilot

This guide shows you how to set up Auto-Pilot, so that the AI answers chosen guest topics on its own.

{% hint style="info" %}
**Before you start**

* A role with permission to edit the AI center.
* Knowledge for the topics you want Auto-Pilot to answer. See [How to add knowledge to the AI](https://docs.guestway.io/ai/ai-center/how-to-add-knowledge-to-the-ai.md).
  {% endhint %}

## Create an Auto-Pilot

{% stepper %}
{% step %}

### Add the Auto-Pilot

Go to **AI Center** → **Auto-Pilot**, and click **Add Auto-Pilot**. Give it a **Name**, and choose the properties under **Where this applies**.

If your properties need different rules, create one Auto-Pilot for each group, for example one for city apartments and one for holiday homes.
{% endstep %}

{% step %}

### Choose how it runs

Switch on **Enabled**. Switch on **Testing mode**, so that replies arrive as drafts for your team instead of going to guests.
{% endstep %}

{% step %}

### Set the response delay

Set the **Response delay**: how long Auto-Pilot waits before it replies. Choose a longer delay if your team wants time to step in.
{% endstep %}

{% step %}

### Set the send threshold

Under **Send threshold**, choose between **More caution** and **More automation**.
{% endstep %}

{% step %}

### Choose the allowed categories

Under **Allowed categories**, pick the guest topics Auto-Pilot may answer. Check **Message coverage** to see roughly what share of guest messages your choice covers.
{% endstep %}

{% step %}

### Save the Auto-Pilot

Click **Save changes**. The Auto-Pilot appears as a card with the status **Testing**.
{% endstep %}
{% endstepper %}

## Go live

{% stepper %}
{% step %}

### Read the drafts

Read the drafts in the conversations, and fix missing or wrong knowledge.
{% endstep %}

{% step %}

### Switch off testing mode

When you trust the drafts, open the Auto-Pilot and switch off **Testing mode**. The card shows **Enabled**.
{% endstep %}
{% endstepper %}

{% hint style="success" %}
Run **Testing mode** for about a week. Start with high-volume, low-risk topics like Wi-Fi, parking and check-in times. Keep payments, cancellations, complaints and access problems with your team until you trust the results. To try questions without real guests, use the [playground](https://docs.guestway.io/ai/ai-center/how-to-test-answers-in-the-playground.md).
{% endhint %}

## Troubleshooting

<details>

<summary>Why didn't Auto-Pilot reply to a guest?</summary>

Open the conversation, and check the Auto-Pilot details. The most common reasons:

* **Outside Auto-pilot topics:** the message touched a topic you did not allow. The details show **Auto-pilot didn't answer** and list the **Topics in the guest message**, each with **Allowed** or **Not allowed**. Auto-Pilot answers only when every topic is allowed. To compare with the topics of the Auto-Pilot, click **Show Auto-pilot config**. If you want Auto-Pilot to answer a topic that is **Not allowed**, add it to **Allowed categories**.
* **No longer needed:** a team member replied first, or the guest only said "OK", "thanks" or sent a 👍.
* **Would not send or fact check:** the AI was not sure enough, or its reply did not pass the fact check. Add the missing knowledge.

</details>

<details>

<summary>How do I stop Auto-Pilot from replying?</summary>

* For one guest, switch Auto-Pilot off in that conversation.
* For a type of question, remove the topic from **Allowed categories**.
* For a property, take it out of **Where this applies**, or give it its own Auto-Pilot with **Enabled** switched off.
* To check replies before they go out, switch **Testing mode** back on.
* To give your team more time, set a longer **Response delay**.

</details>

## Related

* [AI center](https://docs.guestway.io/ai/ai-center.md): all Auto-Pilot fields and limits.
* [How to test answers in the playground](https://docs.guestway.io/ai/ai-center/how-to-test-answers-in-the-playground.md)
* [About how the AI answers guests](https://docs.guestway.io/ai/ai-center/about-how-the-ai-answers-guests.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.guestway.io/ai/ai-center/how-to-set-up-auto-pilot.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
